On Tue, 27 Jun 2000, Tigran Zakaryan wrote:
[Text elided]
|Setting the port speed at 460800 (divisor=2) I have a resulting ftp speed
|44 kbytes/sec. It's OK as well.
|
|But setting port speed to it max. value 921600 (divisor=1) I cannot achive
|the speed more then 47 kbytes/sec.... It's strange... The quantity of errors
|on the line from ifconfig is less then 0.5%. I have watch by oscilloscope
|the wave-form of signals on the line and can say that there is really a
|signal having the frequency about 920 kHz. Everything seems correct,
|but the speed .... :-)
I don't understand a lot about what you are doing, but it may be that you
will have to modify pppd to get to 921600. The maximum valid speed option
that can be *specified* to the standard pppd is 460800. The valid speeds
are in sys-linux.c.
---
Clifford Kite Not a guru. (tm)
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
