When I connect with my gnome modemlights applet, using the default
commands
/usr/sbin/usernetctl ppp0 up
/usr/sbin/usernetctl ppp0 down
I get the following output.
Jul 25 14:25:20 lake modprobe: can't locate module char-major-108
Jul 25 14:25:20 lake kernel: CSLIP: code copyright 1989 Regents of the
University of California
Jul 25 14:25:20 lake kernel: PPP: version 2.3.7 (demand dialling)
Jul 25 14:25:20 lake kernel: PPP line discipline registered.
Jul 25 14:25:20 lake kernel: registered device ppp0
Jul 25 14:25:20 lake pppd[12025]: pppd 2.3.10 started by root, uid 0
Jul 25 14:25:21 lake WvDial: WvDial: Internet dialer version 1.40
Jul 25 14:25:21 lake WvDial: Initializing modem.
Jul 25 14:25:21 lake WvDial: Sending: ATZ
Jul 25 14:25:22 lake WvDial: ATZ
Jul 25 14:25:22 lake WvDial: OK
Jul 25 14:25:22 lake WvDial: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55
+FCLASS=0
Jul 25 14:25:22 lake WvDial: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Jul 25 14:25:22 lake WvDial: OK
Jul 25 14:25:22 lake WvDial: Modem initialized.
Jul 25 14:25:22 lake WvDial: Sending: ATDT 08450798666
Jul 25 14:25:22 lake WvDial: Waiting for carrier.
Jul 25 14:25:22 lake WvDial: ATDT 08450798666
Jul 25 14:25:42 lake WvDial: CONNECT 115200
Jul 25 14:25:42 lake WvDial: Carrier detected. Starting PPP
immediately.
Jul 25 14:25:42 lake pppd[12025]: Serial connection established.
Jul 25 14:25:42 lake pppd[12025]: Using interface ppp0
Jul 25 14:25:42 lake pppd[12025]: Connect: ppp0 <--> /dev/ttyS1
Jul 25 14:25:43 lake pppd[12025]: Hangup (SIGHUP)
Jul 25 14:25:43 lake pppd[12025]: Connection terminated.
Jul 25 14:25:44 lake pppd[12025]: Hangup (SIGHUP)
Jul 25 14:25:44 lake pppd[12025]: Exit.
Jul 25 14:25:46 lake modprobe: can't locate module char-major-108
Jul 25 14:25:46 lake ifup-ppp: pppd started for ppp0 on /dev/ttyS1 at
115200
Jul 25 14:25:46 lake pppd[12040]: pppd 2.3.10 started by root, uid 0
Jul 25 14:25:47 lake WvDial: WvDial: Internet dialer version 1.40
Jul 25 14:25:47 lake WvDial: Initializing modem.
Jul 25 14:25:47 lake WvDial: Sending: ATZ
Jul 25 14:25:48 lake WvDial: ATZ
Jul 25 14:25:48 lake WvDial: OK
Jul 25 14:25:48 lake WvDial: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55
+FCLASS=0
Jul 25 14:25:48 lake WvDial: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Jul 25 14:25:48 lake WvDial: OK
Jul 25 14:25:48 lake WvDial: Modem initialized.
Jul 25 14:25:48 lake WvDial: Sending: ATDT 08450798666
Jul 25 14:25:48 lake WvDial: Waiting for carrier.
Jul 25 14:25:48 lake WvDial: ATDT 08450798666
Jul 25 14:26:15 lake WvDial: CONNECT 115200
Jul 25 14:26:15 lake WvDial: Carrier detected. Starting PPP
immediately.
Jul 25 14:26:15 lake pppd[12040]: Serial connection established.
Jul 25 14:26:15 lake pppd[12040]: Using interface ppp0
Jul 25 14:26:15 lake pppd[12040]: Connect: ppp0 <--> /dev/ttyS1
Jul 25 14:26:17 lake kernel: PPP BSD Compression module registered
Jul 25 14:26:17 lake kernel: PPP Deflate Compression module registered
Jul 25 14:26:17 lake pppd[12040]: local IP address 158.152.26.156
Jul 25 14:26:17 lake pppd[12040]: remote IP address 158.152.1.222
As you can see, the first time it connects, it gets an immediate
hangup. It then connects again sucessfully. The modemlights aren't
working or responding at this point. I notice the following in the
process list
100 0 11805 5253 0 0 1104 396 pipe_r S ? 0:00
/sbin/ppp-watch ifcfg-ppp0
040 0 11825 11805 0 0 1104 432 rt_sig S ? 0:00
/sbin/ppp-watch ifcfg-ppp0
100 0 11827 11825 0 0 1524 712 wait4 S ttyS1 0:00
/usr/sbin/pppd -detach lock modem crtscts
If I kill the first ppp-watch process, all is fine - the modemlights
work, the connection is OK, and I can use modemlights to disconnect.
Any ideas why I'm getting two ppp-watches. Is that the problem?
I'm using RH6.1 and kernel 2.2.12-20
Many thanks
Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
