Hi Thierry,

I agree Nikolaus's fix is more efficient and works too.

Robert

-----Original Message-----
From: Thierry Reding [mailto:[email protected]]
Sent: Thursday, September 25, 2014 1:55 AM
To: [email protected]
Cc: [email protected]; [email protected]; Yang, Robert; 
Nikolaus Voss
Subject: Re: [PATCH 1/1] PWM-atmel: Fixed a bug which set the pwm clock 
prescaler incorrectly. In the defect code the prescaler was always one more 
than expected value, which resulted in the pwm output with wrong frequency and 
duty cycle.

On Wed, Sep 10, 2014 at 03:35:19PM -0600, [email protected] wrote:
> From: ryang <[email protected]>
>
> Signed-off-by: ryang <[email protected]>
> ---
>  drivers/pwm/pwm-atmel.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c index
> 6e700a5..2dca0bf 100644
> --- a/drivers/pwm/pwm-atmel.c
> +++ b/drivers/pwm/pwm-atmel.c
> @@ -128,7 +128,8 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct 
> pwm_device *pwm,
>                       return -EINVAL;
>               }
>       }
> -
> +     /* Need to reduce the prescaler by 1 */
> +     pres--;
>       /* Calculate the duty cycles */
>       prd = div;
>       div *= duty_ns;
> --
> 1.9.1

I think this was fixed by a different patch by Nikolaus in a more direct way, 
see: https://lkml.org/lkml/2014/9/24/28

I've pushed that patch to the for-next branch of the PWM tree. Can you verify 
that the issue you were seeing is gone?

Thierry
Please be advised that this email may contain confidential information. If you 
are not the intended recipient, please notify us by email by replying to the 
sender and delete this message. The sender disclaims that the content of this 
email constitutes an offer to enter into, or the acceptance of, any agreement; 
provided that the foregoing does not invalidate the binding effect of any 
digital or other electronic reproduction of a manual signature that is included 
in any attachment.
--
To unsubscribe from this list: send the line "unsubscribe linux-pwm" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to