Stefan,
On Wed, 17 Jan 2001, Stefan Goerres wrote:
> nearly 150GB RAID0 device out of my IBM 75GB disks. Additionally I
> have to small swap partitions. After changing the partition type to
> "fd", rebooting and formatting the /dev/md0 and /dev/md1 I was ably to
> install a full SuSE Distro on the md0 device. Now my problems
> start.... the /dev/md1 I have mounted to /boot .... I tried to
IIRC the /boot partition has to be completely within the first 1024
cylinders of the disk, or lilo doesn't like it...
Maybe you need to put the boot partitions in /dev/md0 before /dev/md1
partitions...
> configure LILO like it is described in "Boot + Root + Raid + Lilo :
> Software Raid HOWTO" but I can't get it working. Even the booting with
> the SuSE install disk and starting of the /dev/md0 device does not
> work. LILO reports device 0x102 can not be found and does nothing ....
device 0x102 is /dev/kmem - I guess it can't mount the root filesystem, or
the root fs is missing /dev/... don't know...
> So how Can I start fixing this??? What informations do u gurus out
> there need to help me a little bit with my trouble.....
Sorry I couldn't be more help...
Regards,
Corin
/------------------------+-------------------------------------\
| Corin Hartland-Swann | Direct: +44 (0) 20 7544 4676 |
| Commerce Internet Ltd | Mobile: +44 (0) 79 5854 0027 |
| 22 Cavendish Buildings | Tel: +44 (0) 20 7491 2000 |
| Gilbert Street | Fax: +44 (0) 20 7491 2010 |
| Mayfair | Web: http://www.commerce.uk.net/ |
| London W1K 5HJ | E-Mail: [EMAIL PROTECTED] |
\------------------------+-------------------------------------/
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
