From: "Dambacher" <[EMAIL PROTECTED]> > I have the 2.2.18aa2 kernel up and running with suse linux 7.0 and lilo > First upgrade your lilo with the latest version from the suse update ftp > (use rpm -F -v -h --force to get rid of the dependencies) > > Now everything depends on how you set up lilo. > To help you with that, I need your /etc/raidtab, /etc/lilo.conf as well as all fdisk -l /dev/hdxy > > bye > Ulf > -----Ursprungliche Nachricht----- > Von: Stefan Goerres [SMTP:[EMAIL PROTECTED]] > Gesendet am: Mittwoch, 17. Januar 2001 14:40 > An: [EMAIL PROTECTED] > Betreff: Booting with RAID-0 and RAID-1 devices > > Hello Raid friends.... > > well after some trouble connecting to the list I hope that this mail > reaches you. I have some trouble I nee help about .... but let me > describe in detail: > > I patched a 2.2.18 kernel with the latest IDE and RAID stuff I had > found. Compiled a latest set of utils and made a SuSE 7.0 standard > bootdisk. I changed the kernel to the one I made and could boot off > this disk a raid aware kernel. I needed to pass some kernel parameters > for my hde and hdg disk to be detected correctly but than it worked > fine. So I put partitions on the disk and made a 50MB RAID1 and a > nearly 150GB RAID0 device out of my IBM 75GB disks. Additionally I > have to small swap partitions. After changing the partition type to > "fd", rebooting and formatting the /dev/md0 and /dev/md1 I was ably to > install a full SuSE Distro on the md0 device. Now my problems > start.... the /dev/md1 I have mounted to /boot .... I tried to > configure LILO like it is described in "Boot + Root + Raid + Lilo : > Software Raid HOWTO" but I can't get it working. Even the booting with > the SuSE install disk and starting of the /dev/md0 device does not > work. LILO reports device 0x102 can not be found and does nothing .... > So how Can I start fixing this??? What informations do u gurus out > there need to help me a little bit with my trouble..... > > Hoping and waiting.... > > Steve Well I updated my lilo with the latest avail. Version from Suse ftp and now evrything is fine ;) Thanks for all help. Steve - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED]
