At 07:56 PM 2001-01-22, Friedrich Lobenstock wrote: >Have you tried to connect one of the two drives to a normal IDE >Bus and did "fdisk -l"? Could it be that you can just mount the >vfat partitions, read-only of cource)? Under raid-1, that might have worked, but he mentioned that the array was raid-0, which may have a partition table on it but certainly wouldn't be mountable without the other half. -j PS: Here's an idea: pop drives/card in windows box (or put windows on original box), backup to drive or tape x, put drives in linux box (or put linux back on the original box), make a raid set out of the two original drives, and copy from backup drive/tape. This requires additional hardware (an extra drive the size of your array, or tape<s>) but is sure to work... - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED]
