Hello
I forward the email recevied from mylex just because lot
of people asked me if I found out a solution. hope it helps.
Octave
-----------
Dear Sir: Shut down and reboot, then go into EzAssist and select
Perform Administration On -> Logical Drive and set the Read and Write
policies there.
-----------
octave klaba wrote:
>
> Hello,
>
> On Mylex 170 we have, the read/write cache disabled.
> How can I switch it on ? Since we have it with raid-1
> and the hd has the cache too, do we lose the data if
> the server caches ?
>
> Thanks
> Octave
>
> DAC960#0: Logical Drives:
> DAC960#0: /dev/rd/c0d0: RAID-1, Online, 35807232 blocks
> DAC960#0: Logical Device Initialized, BIOS Geometry:
> 255/63
> DAC960#0: Stripe Size: 64KB, Segment Size: 8KB
> DAC960#0: Read Cache Disabled, Write Cache Disabled
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to [EMAIL PROTECTED]
--
Amicalement,
oCtAvE
Illegal division by zero ?!! Aaah ? I'm _root_ !!
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
