Hi,
I am having a problem with an ide RAID array and am hoping
someone here can give me an idea how I can deal with it. I
have just moved /dev/hda to /dev/hde and /dev/hdc is now
/dev/hdg. The relevant portion of raidtab is:
# /home/ftp
raiddev /dev/md5
raid-level linear
nr-raid-disks 2
persistent-superblock 1
chunk-size 64
device /dev/hde2
raid-disk 0
device /dev/hdg1
raid-disk 1
These were once /dev/hda2 and /dev/hdc1 respectively. I
now get the following kernel messages when trying to start.
(read) ide/host2/bus0/target0/lun0/part2's sb offset:
26516992 [events: 00000114]
md: could not lock [dev 03:02], zero-size? Marking faulty.
could not import [dev 03:02], trying to run array
nevertheless.
md: could not lock [dev 16:01], zero-size? Marking faulty.
could not import [dev 16:01], trying to run array
nevertheless.
autorun ...
considering ide/host2/bus0/target0/lun0/part2 ...
adding ide/host2/bus0/target0/lun0/part2 ...
created md5
bind<ide/host2/bus0/target0/lun0/part2,1>
running: <ide/host2/bus0/target0/lun0/part2>
now!
ide/host2/bus0/target0/lun0/part2's event counter: 00000114
md: device name has changed from [dev 03:02] to
ide/host2/bus0/target0/lun0/part2 since last import!
md5: former device [dev 16:01] is unavailable, removing
from array!
md5: max total readahead window set to 124k
md5: 1 data-disks, max readahead per data-disk: 124k
md: md5, array needs 2 disks, has 1, aborting.
linear: disks are not ordered, aborting!
pers->run() failed ...
do_md_run() returned -22
md5 stopped.
unbind<ide/host2/bus0/target0/lun0/part2,0>
export_rdev(ide/host2/bus0/target0/lun0/part2)
... autorun DONE.
Doesn't look too good. Short of moving the drives back to
their old controler, is there anything I can do to get the
array back up wit the data intact?
Regards,
Shane
--
Shane Wegner: [EMAIL PROTECTED]
http://www.cm.nu/~shane/
PGP: 1024D/FFE3035D
A0ED DAC4 77EC D674 5487
5B5C 4F89 9A4E FFE3 035D
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
