W liście z wto, 18-01-2005, godz. 18:34, J. Ryan Earl pisze:
> "You will get 2 parallel sequential reads at around 120MB/sec
> assuming you're not bus limited."
>
> To clarify because this looks ambiguous to me now, you should be able to
> perform 2 parallel sequential reads both at 60MB/sec = 120MB/sec total.
>
> -ryan
>
Hi,
Unfortunatelly it is not the case. Please go to my original e-mail. I've
ran two simultaneous tests and I get:
hdparm -t /dev/md6 &
hdparm -t /dev/md6
This is the result:
--disk/hdg----disk/hde-
_read write _read write
0 0 : 0 0
0 0 : 0 0
124k 0 :26.0M 0
368k 0 :45.5M 0
0 0 : 0 0
0 0 : 896k 0
124k 0 :1568k 0
0 0 : 0 0
One disk works with 75% of its full speed, the second one works with
0,6% of its full speed or even less.
Best regards, Janusz
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
