By the way the patches did not fix my boot issue with the RAID 1+0. I am using SuSe 9.2 if this helps. I've had to add in a few extra lines into my boot.local to get it show up at boot.
Brad Dameron SeaTab Software www.seatab.com On Wed, 2005-01-26 at 14:14, J. Ryan Earl wrote: > This bug that's fixed in 1.9.0, is in a bug when you create the array? ie > do we need to use 1.9.0 to create the array. I'm looking to do the same but > my bootdisk currently only has 1.7.soemthing on it. Do I need to make a > custom bootcd with 1.9.0 on it? > > Thanks, > -ryan > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Luca Berra > Sent: Wednesday, January 26, 2005 9:17 AM > To: [email protected] > Subject: Re: Software RAID 0+1 with mdadm. > > > On Tue, Jan 25, 2005 at 02:28:21PM -0800, Brad Dameron wrote: > >Everything seems ok after boot. But again no /dev/md0 in /proc/mdstat. > >But then if I do a mdadm --assemble --scan it will then load /dev/md0. > there is a bug in mdadm, see my mail "patches for mdadm 1.8.0" or wait > for 1.9.0 > > L. > > -- > Luca Berra -- [EMAIL PROTECTED] > Communication Media & Services S.r.l. > /"\ > \ / ASCII RIBBON CAMPAIGN > X AGAINST HTML MAIL > / \ > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
