Good morning! :)
End of january I had some problems with an faulty harddisk, which was part of an RAID1 (two mirroed disks containing 4 partitions).
I replaced it, and got some realy good instructions from Gordon Henderson.
Last week the same problem occured again, and I decided to replace the controller, too. Now its an PCI 4-port S-ATA controller, and everything runs fine till now.
My question now is: the formerly used /etc/mdadm.conf had some lines like: ARRAY /dev/md1 level=raid1 num-devices=2 UUID=66f80d1a:621442c5:2b6eabe8:3a9f5e54 devices=/dev/sda6,/dev/sdb6 ARRAY /dev/md0 level=raid1 num-devices=2 UUID=06b9cdec:65448b34:3add2ff0:2180f5cd devices=/dev/sda5,/dev/sdb5
How does I get those UUID information, to add them to the new /etc/mdadm.conf?
Have a nice day Torsten - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
