@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ mdstat after reboot
[EMAIL PROTECTED]:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6] [raid10]
md0 : active raid1 hdc1[1]
155268096 blocks [2/1] [_U]
unused devices: <none>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ the below error shows after a boot when excuted in kde konsole
[EMAIL PROTECTED]:/home/rob# mdadm /dev/md0 -a /dev/hda1 mdadm: hot add failed for /dev/hda1: Invalid argument
but this error is shown from a tty console
md: could not bd_claim hda1 md: error, md_import_device() returned -16 mdadm: hot add failed for /dev/hda1 : invalid argument
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ this is what shows in dmesg
md: could not bd_claim hda1. md: error, md_import_device() returned -16 md: could not bd_claim hda1. md: error, md_import_device() returned -16 md: could not bd_claim hda1. md: error, md_import_device() returned -16
i had this bd_claim error when i first tried to build the array but it went away when i wiped every thing and started over this box is the only time i have seen this error and i tried using different drives -- but of the same type -- when the problem showed up on the initial build
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
