Hi Bart,
Is that a RAID1 ou RAID5?
Can you give the output of these commands?
mdadm --misc -D /dev/md3
mdadm --misc -E /dev/hd{a,b,e,f}4
One other thing. Are you sure that all you raid partitions are marked
0xfd ?
Also attach you mdadm.conf/raidconf file, if you have any...
Regards,
Rui Santos
[EMAIL PROTECTED] wrote:
Hi,
I have the problem that after a power failure I get the message:
Jul 12 15:29:17 kernel: md: created md3
Jul 12 15:29:17 kernel: md: bind<hda4>
Jul 12 15:29:17 kernel: md: bind<hdb4>
Jul 12 15:29:17 kernel: md: bind<hde4>
Jul 12 15:29:17 kernel: md: bind<hdf4>
Jul 12 15:29:17 kernel: md: running: <hdf4><hde4><hdb4><hda4>
Jul 12 15:29:17 kernel: md: kicking non-fresh hde4 from array!
Jul 12 15:29:17 kernel: md: unbind<hde4>
I understand that hde4 is not 'fresh' and the array need to be rebuild
but I only can do that with 'mdadm --add /dev/md3 /dev/hde4'. I would
like to have it turned into a hot-spare, in which case a rebuild would
start automatic.
This application runs unattended, so there is nobody there to enter
mdadm commands.... How can I make the rebuild starting automatic
(like a hardware raidcard does)?
Regards,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
