On Thursday September 8, [EMAIL PROTECTED] wrote: > Hello All , Is there a documented procedure to follow during > creation or after that will get a raid6 array to self > rebuild ?
I suspect a kernel upgrade would do the trick, though you don't say what kernel you are running. You could probably kick it along by removing and re-adding your spare: mdadm /dev/md_d0 --remove /dev/sdao mdadm /dev/md_d0 --add /dev/sdao (And I assume you mean 'raid5' rather than 'raid6', not that it matters..) NeilBrown > # cat /proc/mdstat > ...snip... > md_d0 : active raid5 sdc[0] sdao[40] sdan[34] sdam[33] sdal[32] > sdak[31] sdaj[30] sdah[29] sdag[28] sdaf[27] sdae[26] sdad[25] > sdac[24] sdab[23] sdaa[22] sdz[21] sdy[20] sdw[19] sdv[18] sdu[17] > sdt[16] sds[15] sdr[14] sdq[13] sdp[12] sdo[11] sdn[10] sdl[9] sdk[8] > sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2](F) sdd[1] > 1244826240 blocks level 5, 64k chunk, algorithm 2 [36/35] > [UU_UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU] - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
