Ok, I just created my first ever raid 5 using software raid.
I am using a 2.6.14 kernel and the just newly supported MV88SX6041
Marvell SATA Controller. I received the following errors when the device
is initialized in the kernel
blk_queue_max_hw_segments: set to minimum 1
repeated a bunch of times.
And I wonder if this is why it is so slow, my /proc/mdstat shows the
following:
orion ~ # cat /proc/mdstat
Personalities : [raid5]
md_d0 : active raid5 sda1[0] sdd1[4] sdc1[2] sdb1[1]
234444288 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
[===================>.] recovery = 98.9% (77292696/78148096)
finish=102.9min speed=136K/sec
unused devices: <none>
As you can see it is almost finished, but it has been a little over 5
days, seems a little high, for 80GB drives, but then again this is my
first time using mdadm.
Could someone let me know if this is normal or if I have something
really messed up.
Spencer
--
http://www.fastmail.fm - mmm... Fastmail...
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
