Also export current (average) speed and status in sysfs.
Signed-off-by: Neil Brown <[EMAIL PROTECTED]>
### Diffstat output
./Documentation/md.txt | 22 ++++++++
./drivers/md/md.c | 110
++++++++++++++++++++++++++++++++++++++++++--
./include/linux/raid/md_k.h | 4 +
3 files changed, 131 insertions(+), 5 deletions(-)
diff ./Documentation/md.txt~current~ ./Documentation/md.txt
--- ./Documentation/md.txt~current~ 2005-12-12 12:12:50.000000000 +1100
+++ ./Documentation/md.txt 2005-12-12 12:12:53.000000000 +1100
@@ -207,6 +207,28 @@ All md devices contain:
available. It will then appear at md/dev-XXX (depending on the
name of the device) and further configuration is then possible.
+ sync_speed_min
+ sync_speed_max
+ This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
+ however they only apply to the particular array.
+ If no value has been written to these, of if the word 'system'
+ is written, then the system-wide value is used. If a value,
+ in kibibytes-per-second is written, then it is used.
+ When the files are read, they show the currently active value
+ followed by "(local)" or "(system)" depending on whether it is
+ a locally set or system-wide value.
+
+ sync_completed
+ This shows the number of sectors that have been completed of
+ whatever the current sync_action is, followed by the number of
+ sectors in total that could need to be processed. The two
+ numbers are separated by a '/' thus effectively showing one
+ value, a fraction of the process that is complete.
+
+ sync_speed
+ This shows the current actual speed, in K/sec, of the current
+ sync_action. It is averaged over the last 30 seconds.
+
As component devices are added to an md array, they appear in the 'md'
directory as new directories named
diff ./drivers/md/md.c~current~ ./drivers/md/md.c
--- ./drivers/md/md.c~current~ 2005-12-12 12:12:50.000000000 +1100
+++ ./drivers/md/md.c 2005-12-12 12:12:57.000000000 +1100
@@ -81,10 +81,22 @@ static DEFINE_SPINLOCK(pers_lock);
* idle IO detection.
*
* you can change it via /proc/sys/dev/raid/speed_limit_min and _max.
+ * or /sys/block/mdX/md/sync_speed_{min,max}
*/
static int sysctl_speed_limit_min = 1000;
static int sysctl_speed_limit_max = 200000;
+static inline int speed_min(mddev_t *mddev)
+{
+ return mddev->sync_speed_min ?
+ mddev->sync_speed_min : sysctl_speed_limit_min;
+}
+
+static inline int speed_max(mddev_t *mddev)
+{
+ return mddev->sync_speed_max ?
+ mddev->sync_speed_max : sysctl_speed_limit_max;
+}
static struct ctl_table_header *raid_table_header;
@@ -2197,6 +2209,90 @@ md_scan_mode = __ATTR(sync_action, S_IRU
static struct md_sysfs_entry
md_mismatches = __ATTR_RO(mismatch_cnt);
+static ssize_t
+sync_min_show(mddev_t *mddev, char *page)
+{
+ return sprintf(page, "%d (%s)\n", speed_min(mddev),
+ mddev->sync_speed_min ? "local": "system");
+}
+
+static ssize_t
+sync_min_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ int min;
+ char *e;
+ if (strncmp(buf, "system", 6)==0) {
+ mddev->sync_speed_min = 0;
+ return len;
+ }
+ min = simple_strtoul(buf, &e, 10);
+ if (buf == e || (*e && *e != '\n') || min <= 0)
+ return -EINVAL;
+ mddev->sync_speed_min = min;
+ return len;
+}
+
+static struct md_sysfs_entry md_sync_min =
+__ATTR(sync_speed_min, S_IRUGO|S_IWUSR, sync_min_show,
sync_min_store);
+
+static ssize_t
+sync_max_show(mddev_t *mddev, char *page)
+{
+ return sprintf(page, "%d (%s)\n", speed_max(mddev),
+ mddev->sync_speed_max ? "local": "system");
+}
+
+static ssize_t
+sync_max_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ int max;
+ char *e;
+ if (strncmp(buf, "system", 6)==0) {
+ mddev->sync_speed_max = 0;
+ return len;
+ }
+ max = simple_strtoul(buf, &e, 10);
+ if (buf == e || (*e && *e != '\n') || max <= 0)
+ return -EINVAL;
+ mddev->sync_speed_max = max;
+ return len;
+}
+
+static struct md_sysfs_entry md_sync_max =
+__ATTR(sync_speed_max, S_IRUGO|S_IWUSR, sync_max_show,
sync_max_store);
+
+
+static ssize_t
+sync_speed_show(mddev_t *mddev, char *page)
+{
+ unsigned long resync, dt, db;
+ resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ dt = ((jiffies - mddev->resync_mark) / HZ);
+ if (!dt) dt++;
+ db = resync - (mddev->resync_mark_cnt);
+ return sprintf(page, "%ld\n", db/dt/2); /* K/sec */
+}
+
+static struct md_sysfs_entry
+md_sync_speed = __ATTR_RO(sync_speed);
+
+static ssize_t
+sync_completed_show(mddev_t *mddev, char *page)
+{
+ unsigned long max_blocks, resync;
+
+ if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
+ max_blocks = mddev->resync_max_sectors;
+ else
+ max_blocks = mddev->size << 1;
+
+ resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ return sprintf(page, "%lu / %lu\n", resync, max_blocks);
+}
+
+static struct md_sysfs_entry
+md_sync_completed = __ATTR_RO(sync_completed);
+
static struct attribute *md_default_attrs[] = {
&md_level.attr,
&md_raid_disks.attr,
@@ -2210,6 +2306,10 @@ static struct attribute *md_default_attr
static struct attribute *md_redundancy_attrs[] = {
&md_scan_mode.attr,
&md_mismatches.attr,
+ &md_sync_min.attr,
+ &md_sync_max.attr,
+ &md_sync_speed.attr,
+ &md_sync_completed.attr,
NULL,
};
static struct attribute_group md_redundancy_group = {
@@ -4425,10 +4525,10 @@ static void md_do_sync(mddev_t *mddev)
printk(KERN_INFO "md: syncing RAID array %s\n", mdname(mddev));
printk(KERN_INFO "md: minimum _guaranteed_ reconstruction speed:"
- " %d KB/sec/disc.\n", sysctl_speed_limit_min);
+ " %d KB/sec/disc.\n", speed_min(mddev));
printk(KERN_INFO "md: using maximum available idle IO bandwidth "
"(but not more than %d KB/sec) for reconstruction.\n",
- sysctl_speed_limit_max);
+ speed_max(mddev));
is_mddev_idle(mddev); /* this also initializes IO event counters */
/* we don't use the checkpoint if there's a bitmap */
@@ -4469,7 +4569,7 @@ static void md_do_sync(mddev_t *mddev)
skipped = 0;
sectors = mddev->pers->sync_request(mddev, j, &skipped,
- currspeed < sysctl_speed_limit_min);
+ currspeed < speed_min(mddev));
if (sectors == 0) {
set_bit(MD_RECOVERY_ERR, &mddev->recovery);
goto out;
@@ -4534,8 +4634,8 @@ static void md_do_sync(mddev_t *mddev)
currspeed = ((unsigned
long)(io_sectors-mddev->resync_mark_cnt))/2
/((jiffies-mddev->resync_mark)/HZ +1) +1;
- if (currspeed > sysctl_speed_limit_min) {
- if ((currspeed > sysctl_speed_limit_max) ||
+ if (currspeed > speed_min(mddev)) {
+ if ((currspeed > speed_max(mddev)) ||
!is_mddev_idle(mddev)) {
msleep(500);
goto repeat;
diff ./include/linux/raid/md_k.h~current~ ./include/linux/raid/md_k.h
--- ./include/linux/raid/md_k.h~current~ 2005-12-12 12:12:50.000000000
+1100
+++ ./include/linux/raid/md_k.h 2005-12-12 12:12:53.000000000 +1100
@@ -143,6 +143,10 @@ struct mddev_s
sector_t resync_mismatches; /* count of sectors
where
* parity/replica
mismatch found
*/
+ /* if zero, use the system-wide default */
+ int sync_speed_min;
+ int sync_speed_max;
+
int ok_start_degraded;
/* recovery/resync flags
* NEEDED: we might need to start a resync/recover
-
To unsubscribe from this list: send the line "unsubscribe linux-raid"
in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
