On Sunday January 22, [EMAIL PROTECTED] wrote: > Hello Neil , > > On Mon, 23 Jan 2006, Neil Brown wrote: > > On Monday January 23, [EMAIL PROTECTED] wrote: > >> NeilBrown wrote: > >>> In line with the principle of "release early", following are 5 patches > >>> against md in 2.6.latest which implement reshaping of a raid5 array. > >>> By this I mean adding 1 or more drives to the array and then re-laying > >>> out all of the data. > >>> > >> I think my question is already answered by this, but... > >> > >> Would this also allow changing the size of each raid device? Let's say > >> I currently have 160 GB x 6, could I change that to 300 GB x 6 or am I > >> only allowed to add more 160 GB devices? > > > > Changing the size of the devices is a separate operation that has been > > supported for a while. > > For each device in turn, you fail it and replace it with a larger > > device. (This means the array runs degraded for a while, which isn't > > ideal and might be fixed one day). > > > > Once all the devices in the array are of the desired size, you run > > mdadm --grow /dev/mdX --size=max > > and the array (raid1, raid5, raid6) will use up all available space on > > the devices, and a resync will start to make sure that extra space is > > in-sync. > How does one come up with a accurate '--size=max' ? > I thought someone had asked this question before , but the > message where this was mentioned eluded me . > Tia , JimL
--size=max is literal. If you say 'max', mdadm will either figure out the maximum, or tell the kernel to (I don't remember which). NeilBrown - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
