Nathanial Byrnes wrote:
> Yes, I did not have the funding nor approval to purchase more hardware
> when I set it up (read wife). Once it was working... the rest is
> history.
>
>
OK, so if you have a pair of IDE disks, jumpered as Master and slave,
and if one fails:
If Master failed, re-jumper remaining disk on pair on same cable as
Master, no slave present
If Slave failed, re-jumper remaining disk on pair on same cable as
Master, no slave present.
Then you will have the remaining disk working normally, at least.
When you can afford it I suggest buying a controller with enough ports
to support the number of drives you have, with no Master/Slave pairing.
Good luck !
And to the software guys trying to help: We need to start with the
(obvious) hardware problem, before we advise on how to recover data from
a borked system..
Once he has the jumpering on the drives sorted out, the drive that went
missing will be back again..
--
Regards,
Maurice
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
