Hello H., Monday, May 15, 2006, 12:10:06 AM, you wrote:
HPA> Followup to: <[EMAIL PROTECTED]> HPA> By author: Jim Klimov <[EMAIL PROTECTED]> HPA> In newsgroup: linux.dev.raid >> >> Since the new parted worked ok (older one didn't), we were happy >> until we tried a reboot. During the device initialization and after >> it the system only recognises the 6 or 7 partitions which start >> before the 2000Gb limit: >> HPA> For a DOS partition table, there is no such thing as a partition HPA> starting beyond 2 TB. You need to use a GPT or other more HPA> sophisticated partition table. Thank you for the suggestion, we'll research it. Haven't tried any other partitioning schemes before :) A couple of short yes-no questions, if I may: 1) Are the GPT tables a feature of Itanium platforms, or can they be used on usual 32-bit (Xeon) servers with Linux inside? 2) Is it possible to convert the partitioning schemes "on-the-fly", or should we backup one array, repartition it and format the new partitions, and restore the data? I believe this is a safer way in any case, but several terabytes are not so easy and quick to back up :) And a longer question: 3) Are there any other features I should know of before relying on GPT? Device naming? Addressing? Driver updates? Boot-up issues? I'll use Google to find more FAQs now... ;) -- Best regards, Jim Klimov mailto:[EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
