Robin Bowes wrote:
Robin Bowes wrote:
This worked:
# mdadm --assemble --auto=yes /dev/md2 /dev/sdc /dev/sdd /dev/sde
/dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj
mdadm: /dev/md2 has been started with 8 drives.
However, I'm not sure why it didn't start automatically at boot. Do I
need to put it in /etc/mdadm.conf for it to star automatically? I
thought md start all arrays it found at a start up?
OK, I put /dev/md2 in /etc/mdadm.conf and it didn't make any difference.
This is mdadm.conf (uuids are on same line as ARRAY):
DEVICE partitions
ARRAY /dev/md1 level=raid1 num-devices=2
uuid=300c1309:53d26470:64ac883f:2e3de671
ARRAY /dev/md0 level=raid1 num-devices=2
uuid=89649359:d89365a6:0192407d:e0e399a3
ARRAY /dev/md2 level=raid6 num-devices=8
UUID=68c2ea69:a30c3cb0:9af9f0b8:1300276b
I saw an error fly by as the server was booting saying "/dev/md2 not found".
Do I need to create this device manually?
Try adding
auto=part
at the end of the /dev/md2 entry.
Regards,
Richard
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
