Currently raid5 depends on clearing the BIO_UPTODATE flag to signal an
error to higher levels. While this should be sufficient, it is safer
to explicitly set the error code as well - less room for confusion.
Signed-off-by: Neil Brown <[EMAIL PROTECTED]>
### Diffstat output
./drivers/md/raid5.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2006-12-07 15:33:40.000000000 +1100
+++ ./drivers/md/raid5.c 2006-12-07 15:44:41.000000000 +1100
@@ -1818,7 +1818,9 @@ static void handle_stripe5(struct stripe
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
for (i=disks; i-- ;) {
int rw;
@@ -2359,7 +2361,9 @@ static void handle_stripe6(struct stripe
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
for (i=disks; i-- ;) {
int rw;
@@ -2859,7 +2863,9 @@ static int make_request(request_queue_t
if ( rw == WRITE )
md_write_end(mddev);
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
return 0;
}
@@ -3127,7 +3133,9 @@ static int retry_aligned_read(raid5_con
int bytes = raid_bio->bi_size;
raid_bio->bi_size = 0;
- raid_bio->bi_end_io(raid_bio, bytes, 0);
+ raid_bio->bi_end_io(raid_bio, bytes,
+ test_bit(BIO_UPTODATE, &raid_bio->bi_flags)
+ ? 0 : -EIO);
}
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
