On Fri, 20 Nov 1998, Neill Mitchell wrote:
> I can't seem to get my RAID-1 to work under 2.1.129. raidstart /dev/md0
> gives the error - /dev/md0 Invalid argument. I've got the latest raidtools
> and I have tried with mkraid --upgrade which seems to work. mkraid /dev/md0
> says there is an existing ext2 partition on /dev/sda2. As I'm not to worried
> about the data on md0 I tried mkraid --really-force /dev/md0. This finds the
> two disks and then aborts. What am I doing wrong ? How do I get my RAID-1 to
> work again (it was working with 2.1.122) ?
> Thanks in advance.
I have the same symptoms with 2.0.36 & 2.1.29 - downgraded to a clean 2.1.127,
patched with raid0145-19981110 and development kernel works. Using BusLogic 958,
adaptec 2940, IBM DCAS33403's. RaidTools-0.90 running a 2 disk raid0 & 3 disk
raid5. I did the --really-force thing also. Same results.
Regards,
Mike
+--------------------------------------------------+
| Mike Nachlinger (408) 446-9914 [EMAIL PROTECTED] |
| Apres Ski Club 1-888-APRESGO www.apres.org |
+--------------------------------------------------+
