You need to have the Linux Driver for your RAID Controller. I believe there
was some discussion a while back about the controller being a AMI Megaraid
and a boot image for 5.1 at http://home.talkcity.com/HardDiskDr/yewnix/
-----Original Message-----
From: David A. Hauan <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, February 09, 1999 11:50 PM
Subject: Dell Power Edge 4200
>
>Please help!
>Nt has me at my wits end.
>
>I have been using Linux since 1.5 kernels, while not yet an
>expert I feel my knowledge is sufficient enough to get through
>most anything, wel it was, till now.
>
>And too, I have not asked gor help from any *group* 'till now.
>
>Problem...
>Dell Power Edge 4200
>AMI Raid Controller... PERC as Dell Defines it. Bios by AMI I guess.
>Four 4gig SCSIs
>Adaptec 29*, whatever SCSI cards.
>256 Meg Mem
>Sony SCSI tape and CD
>
>Am I missing something or should I be able to gleam the inof
>I need to get this thing going with RedHat 5.2 or S.u.S.e 5.3
>from the Root-Raid-HOWTO.
>
>My assumption is, create a boot image containing root raid stuff...
>Seems to me a controller issue is my prob.
>
>Have to cut short, please advise, am I in the right direction?
>
>Thanks,
>dave
>
