I was wondering if anyone could help me out. I am trying to convert to raid
my rh 6.0 installation. I have not patched the system since I believe 6.0 is
"raid aware". I have 4 SCSI disks and I would like to mirror them. I
have partitions on drives 1 and 2 and free space on 3 and 4.
I would like to mirror everything from drive 1 to drive 3 and from drive 2
to drive 4. I created the raidtab file just for the var partition and when
I typed mkraid /dev/md0 I got the following error:
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/sda5, 677872kB, raid superblock at 677760kB
/dev/sda5 is mounted
mkraid: aborted
This is my raidtab file:
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
chunk-size 4
persistent-superblock 1
device /dev/sda5
raid-disk 0
device /dev/sdc5
raid-disk 1
. Any ideas?? Thanks
-pa
Reporting-MTA: dns; out5.ibm.net
Received-From-MTA: dns; slip166-72-131-150.fl.us.ibm.net
Arrival-Date: Thu, 20 May 1999 20:41:22 GMT
Final-Recipient: rfc822; [EMAIL PROTECTED]
Action: failed
Status: 5.1.1
Remote-MTA: dns; mailin1.k-net.dk
Diagnostic-Code: smtp; 553 See http://www.orbs.org/blocked.cgi. Your mailserver is in the ORBS database as an insecure email relay. This is a generic text message.
Last-Attempt-Date: Thu, 20 May 1999 20:41:42 GMT
Jacok, I was wondering if you could help me out. I am trying to convert to
raid my rh 6.0 installation. I have not patched the system since I believe
6.0 is "raid aware". I have 4 SCSI disks and I would like to mirro them. I
have partitions on drives 1 and 2 and free 3 and 4. I would like to mirro
everything from drive 1 to drive 3 and from drive 2 to drive 4. I created
the raidtab file just for the var partition and when I typed mkraid /dev/md0
I get an error that the partition is mounted. Any ideas??
Thanks a lot.
-pa
