On Tue, May 25, 1999 at 07:13:16PM +0200, Joachim Zobel wrote:
> At 23:17 23.05.99 +0200, you wrote:
> >
> >raid-1 also increases read performance. It can do reads just like raid0,
> >because both disks contain the same data. It doesn't read the same block
> >from both disks and compare, instead it reads like from a stripe set (raid0).
> >
> >At least that's the theory. Your points about several drives on the same
> >bus etc. are ofcourse valid. If two IDE disks are put on _separate_ busses
> >and the IDE chipset doesn't stink too much, you should see good read
> performance
> >both from raid0 and raid1.
>
> Seperate buses? How do i find out? Seperate ide controllers is not enough?
Separate IDE busses, not PCI busses :) Sorry for the confusion.
I just meant, don't use master/slave, use secondary/primary.
................................................................
: [EMAIL PROTECTED] : And I see the elder races, :
:.........................: putrid forms of man :
: Jakob �stergaard : See him rise and claim the earth, :
: OZ9ABN : his downfall is at hand. :
:.........................:............{Konkhra}...............:
