I tried to build a raid1 system on the 2.0.36 kernel with raid0145 patch to the kernel, and the raidtool 0.90. However, although the autodetect does detect the raid and file system check does check the device /dev/md0, when system run /etc/init.d/boot till mount local file system, message "Got md request, not good..." shows up on the screen, and system stop. the raid is acturally in reconstruction mode. my fatab was set up mount /dev/md0 at / and my lilo.conf is as boot=/dev/hda2 root=/dev/md0a iamge=/boot/vmlinuz-2.0.36 label=linux .... I have try different patches, but all the same result. Should I use raidtool 0.42 instead of raidtool0.90, I think raid0145 patch and raidtool 0.90 should worked. I follow the Howto from the raidtool0.90 package, and I did install a raid1 system using the official RH6.0 without any problem. Thanks a lot for any help Gordon
