You're OK...there's a newer version of fdisk which recognizes this new
partition type.
________________________________________
Michael D. Black Principal Engineer
[EMAIL PROTECTED] 407-676-2923,x203
http://www.csi.cc Computer Science Innovations
http://www.csi.cc/~mike My home page
FAX 407-676-2355
----- Original Message -----
From: Pat Heath <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 08, 1999 11:28 AM
Subject: Raid0
I was working on doing the autostart for raid0 and the part where it says:
3. The partition-types of the devices used in the RAID must be set to
0xFD (use fdisk and set the type to ``fd'')
is confusing because I don't have a choice of fd for partition type. If I
put it in it lets me do it but labels it unknown. Is this correct or am I
doing something wrong?
Thanks,
Pat
---------------------------------------------------
Patrick Heath
Network Administrator
Fred Hutchinson Cancer Research Center
1100 Fairview Avenue North, A1-162
Seattle, WA 98109
Email: [EMAIL PROTECTED]
Phone: (206) 667-2000
Fax: (206) 667-6525
---------------------------------------------------
