You need to patch your kernel and re-compile for the new raid code.
You are running raidtools 0.9x with a kernel that only has support for 0.4x
and lower.
At 02:09 PM 2/2/2000 +0200, Antanas Masevicius wrote:
>hello,
>
>i've set up a few partitions in order to test raid1, but following error
>ocures:
>
>DESTROYING the contents of /dev/md0 in 5 seconds, Ctrl-C if unsure!
>handling MD device /dev/md0
>analyzing super-block
>disk 0: /dev/hda4, 8032kB, raid superblock at 7936kB
>disk 1: /dev/hdd2, 8032kB, raid superblock at 7936kB
>mkraid: aborted, see the syslog and /proc/mdstat for potential clues.
>
>my /proc/mdstat looks like:
>Personalities : [3 raid1]
>read_ahead not set
>md0 : inactive
>md1 : inactive
>md2 : inactive
>md3 : inactive
>
>and /var/log/syslog says nothing.
>
>====================================================================
>
>Antanas Masevicius Kaunas University of Technology
>Studentu 48a-101 Computer Center
>LT-3028 Kaunas LITNET NOC UNIX Systems Administrator
>Lithuania E-mail: [EMAIL PROTECTED]
===========================================================
David Cooley N5XMT Internet: [EMAIL PROTECTED]
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================
