I've got exactly the same problem on a Mylex hardware RAID-
controller, writing is nearly twice as fast as reading. The drives are
Barracuda 50Gb drives, the controller is a DAC1164P. I use the
latest firmware, and latest drivers from dandelion.com. Kernel
version is 2.2.14, distribution=Mandrake 7.0. Single PIII-600 on
dual motherboard (Asus P2B-DS), 392 Mb RAM.
Do you by any chance have problems with the entire system
freezing after a while or during lots of activity? I've got that problem,
though my firmware should be a fixed version.
Kent R. Nilsen
> Hello,
>
> I have just set up RAID0 with two 30G DiamondMax (Maxtor) ATA-66
> drives connected to a Promise Ultra66 controller.
>
> I am using raid 0.90 in kernel 2.3.51 on a dual PII-450 with 256M RAM.
>
> Here are the results from bonnie:
