> -----Original Message-----
> From: Martin Eriksson [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, March 18, 2000 4:14 AM
> To: [EMAIL PROTECTED]
> Subject: How to get RAID (0) working in kernel 2.2.14 & 2.3.47 ?
>
> Hi!
>
> I've installed my system with the RH6.1 installation process
> to be a small
> boot partition, a small swap part., a bigger raid0 swap part
> and a really
> big raid0 root partition.
Root on RAID0 is stupid. Don't do it. RAID 0 your other partitions (/usr,
/var, /home, /whoosiewhatsit), and leave root as non-RAID, or RAID1. RAID5
might be ok, but I still wouldn't do that either, unless it was on hardware
RAID.
>
> Now this is with kernel 2.2.12-20, and the system uses an
> initrd to load the
> raid0 module.
>
> When I try to upgrade to 2.2.14 or 2.3.47 the raid disk won't start at
> bootup! I have made a new initrd with correct modules but it
> still doesn't
> work.
I don't work with the 2.3.x series, but you need to patch 2.2.14 with the
patch from http://www.redhat.com/~mingo/
Greg
