If dev/md0 is running, then the raid is running...
you need to run mke2fs on it first to format the raid before fsck will work.
At 06:45 PM 3/24/00, Jason Lin wrote:
>I am trying to setup RAID 1 on RedHat6.1.
>
>"fsck /dev/md0" gives the following:
>
>Parallelizing fsck version 1.15 (18-Jul-1999)
>e2fsck 1.15, 18-Jul-1999 for EXT2 FS 0.5b, 95/08/09
>The filesystem size (according to the superblock) is
>757055 blocks
>The physical size of the device is 757024 blocks
>Either the superblock or the partition table is likely
>to be corrupt!
>Abort<y>?
>-------------------------------------
>But the constituent disks have 757055 blocks each.
>Should I do "mkraid --really-force /dev/md0" ?
===========================================================
David Cooley N5XMT Internet: [EMAIL PROTECTED]
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================
