I recently built a level 0 array out of 3 4.3G ultra DMA 66 ide drives.
I have a Promise Ultra66 IDE controler in addition to the Ultra66 ide on
the main board. Each drive is a master and the only drive on the
cable. I am running 2.3.99-pre5 and have moved /usr to the
array. This had been working fine for several weeks, but I have
recently begun having problems unmounting /usr upon shutdown. I get
errors that the file system is busy and the shutdown never completes.
I end up givng the machine a hard reset or just power down.
Does anyone know what may cause this poblem or have any suggestion I
could try to track down the cause?
Thanks,
Kirk
--
Kirk Patton
System Administrator
CA Microprocessor Division
Advanced Micro Devices
Phone (408) 774-7883
Pgr. (408) 870-5461
Fax (408)774-7606
