Brian Grossman wrote:
>
> > I found the message at the bottom on the mailing list archives...
> >
> > I'd like to register a "me too" with this problem. Was there any
> > further discussion?
> >
> > I've got a 2.2.14 kernel with the Mingo patch 2.2.14-B1, and I get the
> > same problem. I get no scsi errors, no other kernel messages after the
> > raid reconstruction starts, and the completion time slowly climbs. This
> > has happened on a couple of machines now.
>
> Does something like 'echo 5120 > /proc/sys/dev/md/speed-limit' make a
> difference?
>
I've got a mirror in this state now, and have tried the above with no
difference. I should have pointed out that the recover percentage
doesn't change. Brian, I'm not sure whether you were asking me if this
makes a difference now or later...
My mdstat from this morning:
# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 sdd2[1] sda2[0] 1024960 blocks [2/2] [UU]
md3 : active raid1 sdd3[1] sda3[0] 7846848 blocks [2/2] [UU]
md2 : active raid1 sde1[2] sdb1[1] 35881024 blocks [2/1] [_U]
recovery=28% finish=6126.7min
md1 : active raid1 sdf1[1] sdc1[0] 17775808 blocks [2/2] [UU]
unused devices: <none>
Thanks
--
Robert Stuart
Systems Administrator
ph: 3864 0364
