Hi all! Recently i�ve installed Red Hat 6.2 on a dual P6 400Mhz with 5 UW SCSI disk with 1 RAID 1 (two disks) and 1 Raid 5 (three disks). I�ve compiled RAID autodetect feature but it seems that it only autodetects the first raid (Mirroring) and then it makes the second raid (5) by means of init scripts. I want it to autodetect both arrays during kernel bootstrap in order to avoid init scripts raid code, but i dont know if i must change something on the sources in order to do this. Perhaps there is a comand line to pass from lilo but i didnt find anything about this at the docs. My raid setup is: sda1 /boot ext2 sda2 swap sdb1 RAID autodetect (1/2 Raid 1 Mirror) / sdb2 swap sdc1 RAID autodetect (2/2 Raid 1 Mirror) / sdc2 swap sdd1 Raid Autodetect (1/3 Raid 5) /var sdd2 swap sde1 Raid autodetect (2/3 Raid 5) /var sde2 swap sdf1 Raid autodetect(3/3 Raid 5) /var sdf2 swap both superblocks have persistent flag to 1 in /etc/raidtab Anyone have experienced such a installation? Thanks in advance! ------------------------------------------------------------------------ Angel J. Alvarez Miguel <[EMAIL PROTECTED]> �rea de Sistemas. Tlfno: +34 91 885 47 04 Servicios Inform�ticos. Universidad de Alcal� ------------------------------------------------------------------------
