Am Die, 04 Jul 2000 schrieben Sie:
> By mistake I installed my raid1 system to use hdc3 as disk 0 and hda3 as
> disk 1. Now I'm planning to change the disks to another machine that
> cannot boot from any other device than hda which means that the current
> installation would not work since I'm booting with lilo and the
> /-partition is also on the raid system.
>
> The question is how do I change the disk 0 to be disk 1 and vice versa
> without losing data? (I would like to do this even if the above condition
> would not force me to do it.)
>
If you have mirrored the whole system it's no problem to swap the two
disks. If LILO is installed for raid it doesn't care about it. I have tested it
with a system completely mirrored on hda and hdc. I was able to swap the
devices without any difference at booting. It all worked fine.
> (I'm using RH 6.2 standard installation with raid1 built in to kernel)
I used RH 6.1
>
> C,
>
> Jaakko Tiistola / First Hop Ltd
Thomas
--
Thomas Scheuermann Software Design Engineer
BARCO Control Rooms Dr. Seufert GmbH
[EMAIL PROTECTED]
