rather than max table size

Now, the determination of subnet max MLID in si_rcv_process_new
in osm_sw_info_rcv.c needs to be based on num_entries rather than max_mlid_ho

Signed-off-by: Hal Rosenstock <[email protected]>
---
Changes since v1:
Update determination of subnet max MLID in si_rcv_process_new

diff --git a/opensm/include/opensm/osm_mcast_tbl.h 
b/opensm/include/opensm/osm_mcast_tbl.h
index 710d199..276b7f7 100644
--- a/opensm/include/opensm/osm_mcast_tbl.h
+++ b/opensm/include/opensm/osm_mcast_tbl.h
@@ -2,6 +2,7 @@
  * Copyright (c) 2004, 2005 Voltaire, Inc. All rights reserved.
  * Copyright (c) 2002-2005 Mellanox Technologies LTD. All rights reserved.
  * Copyright (c) 1996-2003 Intel Corporation. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -95,7 +96,8 @@ typedef struct osm_mcast_fwdbl {
 *              Number of entries in the table (aka number of MLIDs supported).
 *
 *      max_mlid_ho
-*              Maximum MLID value (host order).
+*              Maximum MLID (host order) configured in the multicast port mask
+*              table.
 *
 *      pp_mask_tbl
 *              Pointer to a two dimensional array of port_masks for this 
switch.
diff --git a/opensm/opensm/osm_mcast_tbl.c b/opensm/opensm/osm_mcast_tbl.c
index d7c9529..bdea416 100644
--- a/opensm/opensm/osm_mcast_tbl.c
+++ b/opensm/opensm/osm_mcast_tbl.c
@@ -81,8 +81,6 @@ ib_api_status_t osm_mcast_tbl_init(IN osm_mcast_tbl_t * p_tbl,
                                                IB_MCAST_BLOCK_SIZE) /
                                        IB_MCAST_BLOCK_SIZE) - 1);
 
-       p_tbl->max_mlid_ho = (uint16_t) (IB_LID_MCAST_START_HO + capacity - 1);
-
        /*
           The number of bytes needed in the mask table is:
           The (maximum bit mask 'position' + 1) times the
@@ -122,7 +120,8 @@ void osm_mcast_tbl_set(IN osm_mcast_tbl_t * p_tbl, IN 
uint16_t mlid_ho,
 
        CL_ASSERT(p_tbl);
        CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-       CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+       CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+                                        p_tbl->num_entries - 1));
        CL_ASSERT(p_tbl->p_mask_tbl);
 
        mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
@@ -134,6 +133,8 @@ void osm_mcast_tbl_set(IN osm_mcast_tbl_t * p_tbl, IN 
uint16_t mlid_ho,
 
        if (block_num > p_tbl->max_block_in_use)
                p_tbl->max_block_in_use = (uint16_t) block_num;
+       if (mlid_ho > p_tbl->max_mlid_ho)
+               p_tbl->max_mlid_ho = mlid_ho;
 }
 
 /**********************************************************************
@@ -151,7 +152,8 @@ boolean_t osm_mcast_tbl_is_port(IN const osm_mcast_tbl_t * 
p_tbl,
                CL_ASSERT(port_num <=
                          (p_tbl->max_position + 1) * IB_MCAST_MASK_SIZE);
                CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-               CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+               CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+                                                p_tbl->num_entries - 1));
 
                mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
                mask_offset = port_num / IB_MCAST_MASK_SIZE;
@@ -178,7 +180,8 @@ boolean_t osm_mcast_tbl_is_any_port(IN const 
osm_mcast_tbl_t * p_tbl,
 
        if (p_tbl->p_mask_tbl) {
                CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-               CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+               CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+                                                p_tbl->num_entries - 1));
 
                mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
 
@@ -210,7 +213,8 @@ ib_api_status_t osm_mcast_tbl_set_block(IN osm_mcast_tbl_t 
* p_tbl,
 
        mlid_start_ho = (uint16_t) (block_num * IB_MCAST_BLOCK_SIZE);
 
-       if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 > p_tbl->max_mlid_ho)
+       if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 >
+           p_tbl->num_entries + IB_LID_MCAST_START_HO - 1)
                return IB_INVALID_PARAMETER;
 
        for (i = 0; i < IB_MCAST_BLOCK_SIZE; i++)
@@ -219,6 +223,9 @@ ib_api_status_t osm_mcast_tbl_set_block(IN osm_mcast_tbl_t 
* p_tbl,
        if (block_num > p_tbl->max_block_in_use)
                p_tbl->max_block_in_use = (uint16_t) block_num;
 
+       if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 > p_tbl->max_mlid_ho)
+               p_tbl->max_mlid_ho = mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1;
+
        return IB_SUCCESS;
 }
 
diff --git a/opensm/opensm/osm_sw_info_rcv.c b/opensm/opensm/osm_sw_info_rcv.c
index c335263..ad75fd4 100644
--- a/opensm/opensm/osm_sw_info_rcv.c
+++ b/opensm/opensm/osm_sw_info_rcv.c
@@ -2,6 +2,7 @@
  * Copyright (c) 2004-2008 Voltaire, Inc. All rights reserved.
  * Copyright (c) 2002-2005 Mellanox Technologies LTD. All rights reserved.
  * Copyright (c) 1996-2003 Intel Corporation. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -219,8 +220,10 @@ static void si_rcv_process_new(IN osm_sm_t * sm, IN 
osm_node_t * p_node,
        }
 
        /* set subnet max mlid to the minimum MulticastFDBCap of all switches */
-       if (p_sw->mcast_tbl.max_mlid_ho < sm->p_subn->max_mcast_lid_ho) {
-               sm->p_subn->max_mcast_lid_ho = p_sw->mcast_tbl.max_mlid_ho;
+       if (p_sw->mcast_tbl.num_entries < sm->p_subn->max_mcast_lid_ho -
+                                         IB_LID_MCAST_START_HO + 1) {
+               sm->p_subn->max_mcast_lid_ho = p_sw->mcast_tbl.num_entries +
+                                              IB_LID_MCAST_START_HO - 1;
                OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
                        "Subnet max multicast lid is 0x%X\n",
                        sm->p_subn->max_mcast_lid_ho);
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to