On Sat, 2011-06-25 at 10:10 +0200, Bart Van Assche wrote: > SCSI scanning of a channel:id:lun triplet in Linux works as follows (function > scsi_scan_target() in drivers/scsi/scsi_scan.c): > - If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target and > process the result. > - If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN corresponding > to the specified channel:id:lun triplet to verify whether the LUN exists. > So a SCSI driver must either take the channel and target id values in account > in its quecommand() function or it should declare that it only supports one > channel and one target id. Currently the ib_srp driver does neither. As a > result scanning the SCSI bus via e.g. rescan-scsi-bus.sh causes many > duplicate SCSI devices to be created. For each 0:0:L device, several > duplicates are created with the same LUN number and with (C:I) != (0:0). Fix > this by declaring that the ib_srp driver only supports one channel and one > target id. > > Signed-off-by: Bart Van Assche <[email protected]> > Cc: David Dillow <[email protected]>
Thanks for the additional detail in the commit message. Acked-by: David Dillow <[email protected]> -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
