dapltest server will start with port 45278 and increase by client thread count during each new client connection. If you never restart the server it will continue to increase the listen port based on new clients connecting. If you restart dapltest it will restart back at port 45278. I am not familiar with iWarp CM but the error is coming from rdma_bind_addr (EADDRINUSE|EBUSY|EADDRNOTAVAIL). I will have to defer to Steve for this error.
-arlin > -----Original Message----- > From: [email protected] [mailto:linux-rdma- > [email protected]] On Behalf Of Vipul Pandya > Sent: Friday, November 23, 2012 5:54 AM > To: [email protected] > Cc: Kumar A S; Steve Wise; Abhishek Agrawal; Davis, Arlin R; Divy Le > Ray > Subject: Dapltest test error DAT_CONN_QUAL_IN_USE > > Hi All, > > I was running dapltest between my client and server machines with OFED- > 3.5. While running the test it dapltest server throws an error > DAT_CONN_QUAL_IN_USE if I increase number of threads and endpoints. > > Dapltest server: > --------------- > dapltest -T S -D chelsio1 > > Dapltest client: > --------------- > dapltest -T T -s 102.1.1.2 -D chelsio1 -R BE -i 1 -t 16 -w 8 server SR > 8192 4 client SR 8192 4 > > > Once I run the above test i get the following error on server side and > client side stalls. > > $# dapltest -T S -D chelsio1 > Dapltest: Service Point Ready - chelsio1 > Test[b13f]: dat_psp_create #6 error: DAT_CONN_QUAL_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #0 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #1 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #2 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #3 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #4 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #5 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > Test[b13f]: dat_evd_free (creq) error: DAT_INVALID_STATE > DAT_INVALID_STATE_EVD_IN_USE > Test[b13f]: Warning: dat_ep_disconnect (abrupt) #6 error > DAT_INVALID_STATE DAT_INVALID_STATE_EP_UNCONNECTED > > Following link says DAT_CONN_QUAL_IN_USE error can come if rdma_cm > returns an error due to bind failure. > http://www.mail-archive.com/[email protected]/msg01297.html > > rdma_cm from OFED-3.5 does not provide module parameter > 'unify_tcp_port_space'. So, just to narrow down I installed OFED- > 1.5.4.1 and ran the same test with unify_tcp_port_space=1. However with > that also I was able to reproduced the same issue. > > Please note that if I decrease the numbers of endpoints to 4 then test > works fine. i.e. If I give '-w 4' instead of '-w 8' in command line > then test runs fine. > > I am using dapltest version 2.0.36 which comes from OFED-3.5. > > Can anyone give any pointers on this? > > > Thanks, > Vipul > -- > To unsubscribe from this list: send the line "unsubscribe linux-rdma" > in the body of a message to [email protected] More majordomo > info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
