From: Mitko Haralanov <[email protected]> The Dell blade chassis got an updated backplane which requires new transmitter tuning settings.
Signed-off-by: Mitko Haralanov <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> --- drivers/infiniband/hw/qib/qib_iba7322.c | 59 +++++++++++++++++++------------ 1 file changed, 37 insertions(+), 22 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 08fd74a..16b47ca 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -582,7 +582,7 @@ struct vendor_txdds_ent { static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ -#define TXDDS_EXTRA_SZ 13 /* number of extra tx settings entries */ +#define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */ #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ @@ -7458,15 +7458,20 @@ static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ - { 0, 0, 0, 11 }, /* QME7342 backplane settings */ { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ + { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { @@ -7475,15 +7480,20 @@ static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ - { 0, 0, 0, 13 }, /* QME7342 backplane settings */ { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ + { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { @@ -7492,15 +7502,20 @@ static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ - { 0, 1, 12, 10 }, /* QME7342 backplane setting */ - { 0, 1, 12, 11 }, /* QME7342 backplane setting */ - { 0, 1, 12, 12 }, /* QME7342 backplane setting */ - { 0, 1, 12, 14 }, /* QME7342 backplane setting */ - { 0, 1, 12, 6 }, /* QME7342 backplane setting */ - { 0, 1, 12, 7 }, /* QME7342 backplane setting */ - { 0, 1, 12, 8 }, /* QME7342 backplane setting */ { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ + { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ + { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ + { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
