On Thu, Aug 17, 2023 at 04:33:36PM +0800, Chen Jiahao wrote:
> Referring to platform_get_irq()'s definition, the return value has
> already been checked if ret < 0, and printed via dev_err_probe().
> Calling dev_err_probe() one more time outside platform_get_irq()
> is obviously redundant. Removing outside dev_err_probe() to
> clean it up.
>
> Besides, switch to use platform_get_irq_optional() since the irq
> is optional here.
>
> Signed-off-by: Chen Jiahao <[email protected]>
> ---
> drivers/remoteproc/stm32_rproc.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Applied.
Thanks,
Mathieu
> diff --git a/drivers/remoteproc/stm32_rproc.c
> b/drivers/remoteproc/stm32_rproc.c
> index 98234b44f038..1f53c672c66b 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -712,9 +712,9 @@ static int stm32_rproc_parse_dt(struct platform_device
> *pdev,
> unsigned int tzen;
> int err, irq;
>
> - irq = platform_get_irq(pdev, 0);
> + irq = platform_get_irq_optional(pdev, 0);
> if (irq == -EPROBE_DEFER)
> - return dev_err_probe(dev, irq, "failed to get interrupt\n");
> + return irq;
>
> if (irq > 0) {
> err = devm_request_irq(dev, irq, stm32_rproc_wdg, 0,
> --
> 2.34.1
>
