Protection domain mapper is a QMI service providing mapping between
'protection domains' and services supported / allowed in these domains.
For example such mapping is required for loading of the WiFi firmware or
for properly starting up the UCSI / altmode / battery manager support.
The existing userspace implementation has several issue. It doesn't play
well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
firmware location is changed (or if the firmware was not available at
the time pd-mapper was started but the corresponding directory is
mounted later), etc.
However this configuration is largely static and common between
different platforms. Provide in-kernel service implementing static
per-platform data.
NOTE: this is an RFC / RFC, the domain mapping data might be inaccurate
(especially for SM6xxx and SC7xxx platforms), which is reflected by
several TODO and FIXME comments in the code.
Changes since RFC v1:
- Swapped num_domains / domains (Konrad)
- Fixed an issue with battery not working on sc8280xp
- Added missing configuration for QCS404
Dmitry Baryshkov (5):
soc: qcom: add pd-mapper implementation
remoteproc: qcom: pas: correct data indentation
remoteproc: qcom: adsp: add configuration for in-kernel pdm
remoteproc: qcom: mss: add configuration for in-kernel pdm
remoteproc: qcom: pas: add configuration for in-kernel pdm
drivers/remoteproc/Kconfig | 3 +
drivers/remoteproc/qcom_q6v5_adsp.c | 67 +++++
drivers/remoteproc/qcom_q6v5_mss.c | 84 ++++++
drivers/remoteproc/qcom_q6v5_pas.c | 418 +++++++++++++++++++++++-----
drivers/soc/qcom/Kconfig | 10 +
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/qcom_pdm.c | 302 ++++++++++++++++++++
drivers/soc/qcom/qcom_pdm_msg.c | 189 +++++++++++++
drivers/soc/qcom/qcom_pdm_msg.h | 66 +++++
include/linux/soc/qcom/pd_mapper.h | 35 +++
10 files changed, 1108 insertions(+), 68 deletions(-)
create mode 100644 drivers/soc/qcom/qcom_pdm.c
create mode 100644 drivers/soc/qcom/qcom_pdm_msg.c
create mode 100644 drivers/soc/qcom/qcom_pdm_msg.h
create mode 100644 include/linux/soc/qcom/pd_mapper.h
--
2.39.2
---
Dmitry Baryshkov (5):
soc: qcom: add pd-mapper implementation
remoteproc: qcom: pas: correct data indentation
remoteproc: qcom: adsp: add configuration for in-kernel pdm
remoteproc: qcom: mss: add configuration for in-kernel pdm
remoteproc: qcom: pas: add configuration for in-kernel pdm
drivers/remoteproc/Kconfig | 3 +
drivers/remoteproc/qcom_q6v5_adsp.c | 87 ++++++-
drivers/remoteproc/qcom_q6v5_mss.c | 84 +++++++
drivers/remoteproc/qcom_q6v5_pas.c | 483 ++++++++++++++++++++++++++++++------
drivers/soc/qcom/Kconfig | 10 +
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/qcom_pdm.c | 300 ++++++++++++++++++++++
drivers/soc/qcom/qcom_pdm_msg.c | 188 ++++++++++++++
drivers/soc/qcom/qcom_pdm_msg.h | 66 +++++
include/linux/soc/qcom/pd_mapper.h | 35 +++
10 files changed, 1176 insertions(+), 82 deletions(-)
---
base-commit: 20af1ca418d2c0b11bc2a1fe8c0c88f67bcc2a7e
change-id: 20240301-qcom-pd-mapper-e12d622d4ad0
Best regards,
--
Dmitry Baryshkov <[email protected]>
