On Tue, Feb 02, 2016 at 07:18:50PM +0900, Yoshihiro Shimoda wrote: > To handle the VBUS on/off by a regulator driver, this patch adds > description about phy-supply in the rcar-gen3-phy-usb2.txt. > > Signed-off-by: Yoshihiro Shimoda <[email protected]> > --- > Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > index eaf7e9b..48b33a9 100644 > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > @@ -15,6 +15,8 @@ To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 > Peripheral) are > combined, the device tree node should set interrupt properties to use the > channel as USB OTG: > - interrupts: interrupt specifier for the PHY. > +- phy-supply: Phandle to a regulator that provides power to the VBUS. This > + regulator will be managed during the PHY power on/off sequence.
Is "phy" the actual name of the input supply to the phy? > > Example (R-Car H3): > > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html
