Hi Geert-san, Sorry for the delayed response.
> From: Geert Uytterhoeven > Sent: Tuesday, February 02, 2016 8:02 PM > > Hi Shimoda-san, > > [dropping most CCs to avoid delaying your patch] > > On Thu, Jan 7, 2016 at 10:16 AM, Yoshihiro Shimoda > <[email protected]> wrote: > > Since the related driver (CPG/MSSR driver) only manages the first module > > clock, this driver should not handle the HSUSB registers. So, this patch > > removes the HSUSB registers handling. > > > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > > Example (R-Car H3): > > > > usb-phy@ee080200 { > > compatible = "renesas,usb2-phy-r8a7795"; > > - reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>; > > - reg-names = "usb2_host", "hsusb"; > > + reg = <0 0xee080200 0 0x700>; > > interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&mstp7_clks R8A7795_CLK_EHCI0>, > > - <&mstp7_clks R8A7795_CLK_HSUSB>; > > + clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; > > }; > > > > usb-phy@ee0a0200 { > > compatible = "renesas,usb2-phy-r8a7795"; > > reg = <0 0xee0a0200 0 0x700>; > > - reg-names = "usb2_host"; > > clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; > > }; > > BTW, I think the examples should be updated to use the CPG/MSSR DT > bindings. That can/should be done in a separate patch, of course. Thank you for the comment! I will revise the examples after this patch is applied. Best regards, Yoshihiro Shimoda > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- > [email protected] > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like > that. > -- Linus Torvalds
