Hello.
On 02/10/2016 03:41 AM, Kuninori Morimoto wrote:
Sorry for my un-ordered response
Not sure what you mean by that. :-)
Define the generic R8A7794 part of the sound device node.
This sound device is a complex one and comprises the Audio Clock Generator
(ADG), Sampling Rate Converter Unit (SCU), Serial Sound Interface [Unit]
(SSI[U]), and Audio DMAC-Peripheral-Peripheral.
It is up to the board file to enable the device.
This patch is based on the R8A7791 sound work by Kuninori Morimoto.
Signed-off-by: Sergei Shtylyov <[email protected]>
(snip)
+ rcar_sound,src {
+ src1: src@1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma0 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src@2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma0 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src@3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src@4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src@5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src@6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ };
I think this can't work correctly, because driver is assuming
DT has all channles (from 0). (see linux/sound/soc/sh/rcar/src.c ::
rsnd_src_probe)
At least it doesn't crash and burn. :-)
Playback and recording still work too.
Can you adds dummy src0 with some comments ?
Don't think that's an option. We are supposed to describe the hardware,
not the driver's behavior.
or fix src.c driver ?
Will try to look into it...
MBR, Sergei
