On Sat, Feb 13, 2016 at 09:23:47PM +0100, Geert Uytterhoeven wrote: > On Fri, Feb 12, 2016 at 8:04 PM, Simon Horman > <[email protected]> wrote: > > Instantiate the GPIO keys in the gose device tree. > > > > Based on similar work for the koelsch board by Laurent Pinchart. > > > > Signed-off-by: Simon Horman <[email protected]> > > Tested-by: Magnus Damm <[email protected]> > > --- > > arch/arm/boot/dts/r8a7793-gose.dts | 82 > > ++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 82 insertions(+) > > > > diff --git a/arch/arm/boot/dts/r8a7793-gose.dts > > b/arch/arm/boot/dts/r8a7793-gose.dts > > index baa59fe84298..ccbc1c66cc6c 100644 > > --- a/arch/arm/boot/dts/r8a7793-gose.dts > > +++ b/arch/arm/boot/dts/r8a7793-gose.dts > > @@ -31,6 +31,88 @@ > > device_type = "memory"; > > reg = <0 0x40000000 0 0x40000000>; > > }; > > + > > + gpio-keys { > > + compatible = "gpio-keys"; > > + > > + key-1 { > > + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_1>; > > + label = "SW2-1"; > > + gpio-key,wakeup; > > In the mean time, "gpio-key,wakeup" has been deprecated in favor of > "wakeup-source".
Is the change just a matter of s/gpio-key,wakeup/wakeup-source/ ? If so I'll sort things out.
