This patch set is based on renesas.git / renesas-devel-20160223-v4.5-rc5 tag. (commit id = d0475e2b81af0f6a4e7a9785662173b5a995a164)
This patch set needs the following patches to use the usb 2.0 host: http://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/commit/?h=testing/next&id=cff0fef33d77bd7e98463029e5d0a4191d9bbb95 http://git.kernel.org/cgit/linux/kernel/git/kishon/linux-phy.git/commit/?h=next&id=c7af45e64087a4bebef955f0d005723c35f28176 http://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git/commit/?h=sh-pfc-for-v4.6&id=76250a6c89673f63e37c59772e97cc72f4c8097b Yesterday, I sent the following patch set as RFC. http://thread.gmane.org/gmane.linux.kernel.renesas-soc/1087 Today's patch set is related to the yesterday's patches. But, today's patch set is: - not included about HSUSB node and USB 2.0 host channel 0 enabling because these are under construction for now. - included about defconfig for phy-rcar-gen3-usb2 driver. Yoshihiro Shimoda (5): arm64: dts: r8a7795: add usb2_phy device nodes arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2 arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 40 +++++++++ arch/arm64/boot/dts/renesas/r8a7795.dtsi | 94 ++++++++++++++++++++++ arch/arm64/configs/defconfig | 1 + 3 files changed, 135 insertions(+) -- 1.9.1
