Hi Geert, Thank you for the patch.
On Wednesday 09 March 2016 20:18:36 Geert Uytterhoeven wrote: > The Renesas R-Car System Controller provides power management for the > CPU cores and various coprocessors, following the generic PM domain > bindings in Documentation/devicetree/bindings/power/power_domain.txt. > > This supports R-Car Gen1 (H1), Gen2, and Gen3. > > Signed-off-by: Geert Uytterhoeven <[email protected]> > --- > v3: > - Move power area hierarchy from DT to C (cfr. DT bindings for Renesas > CPG/MSSR), and switch to "#power-domain-cells = <1>", > - Drop fallback compatibility strings, as the bindings are > SoC-specific, > - Rename from renesas,sysc-rcar.txt to renesas,rcar-sysc.txt, > > v2: > - Add R-Car H3 (r8a7795) support, > - Use "renesas,<type>-sysc" instead of "renesas,sysc-<type>", > - Add fallback compatibility strings for R-Car Gen2 and Gen3. > --- > .../bindings/power/renesas,rcar-sysc.txt | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > > diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt new file > mode 100644 > index 0000000000000000..1765fd37c3658b60 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > @@ -0,0 +1,48 @@ > +DT bindings for the Renesas R-Car System Controller > + > +== System Controller Node == > + > +The R-Car System Controller provides power management for the CPU cores and > +various coprocessors. > + > +Required properties: > + - compatible: Must contain one or more of the following: I'd be curious to see a use case for specifying more than one ;-) I think you can phrase it as "Must contain exactly one of the following". Apart from that, Reviewed-by: Laurent Pinchart <[email protected]> > + - "renesas,r8a7779-sysc" (R-Car H1) > + - "renesas,r8a7790-sysc" (R-Car H2) > + - "renesas,r8a7791-sysc" (R-Car M2-W) > + - "renesas,r8a7792-sysc" (R-Car V2H) > + - "renesas,r8a7793-sysc" (R-Car M2-N) > + - "renesas,r8a7794-sysc" (R-Car E2) > + - "renesas,r8a7795-sysc" (R-Car H3) > + - reg: Address start and address range for the device. > + - #power-domain-cells: Must be 1. > + > + > +Example: > + > + sysc: system-controller@e6180000 { > + compatible = "renesas,r8a7791-sysc"; > + reg = <0 0xe6180000 0 0x0200>; > + #power-domain-cells = <1>; > + }; > + > + > +== PM Domain Consumers == > + > +Devices residing in a power area must refer to that power area, as > documented +by the generic PM domain bindings in > +Documentation/devicetree/bindings/power/power_domain.txt. > + > +Required properties: > + - power-domains: A phandle and symbolic PM domain specifier, as defined > in > + <dt-bindings/power/r8a77*-sysc.h>. > + > + > +Example: > + > + L2_CA15: cache-controller@0 { > + compatible = "cache"; > + power-domains = <&sysc R8A7791_PD_CA15_SCU>; > + cache-unified; > + cache-level = <2>; > + }; -- Regards, Laurent Pinchart
