On Wed, Mar 16, 2016 at 08:22:13PM +0300, Sergei Shtylyov wrote:
> On 03/16/2016 08:11 PM, Ulrich Hecht wrote:
>
> >Same as on r8a7791.
> >
> >Signed-off-by: Ulrich Hecht <[email protected]>
> >---
> > arch/arm/boot/dts/r8a7793.dtsi | 33 +++++++++++++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> >index b7f32d3..009ce38 100644
> >--- a/arch/arm/boot/dts/r8a7793.dtsi
> >+++ b/arch/arm/boot/dts/r8a7793.dtsi
> >@@ -509,6 +509,39 @@
> > reg = <0 0xe6060000 0 0x250>;
> > };
> >
> >+ sdhi0: sd@ee100000 {
> >+ compatible = "renesas,sdhi-r8a7793";
> >+ reg = <0 0xee100000 0 0x328>;
> >+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
> >+ clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
> >+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
> >+ <&dmac1 0xcd>, <&dmac1 0xce>;
> >+ dma-names = "tx", "rx";
>
> 4 DMA channels but only 2 channel names?
It looks like that should be:
dma-names = "tx", "rx", "tx", "rx";
It also looks like there should be:
power-domains = <&cpg_clocks>;
Ulrich, could you verify the above and repost as necessary?
