On Wed, Mar 16, 2016 at 08:20:46PM +0300, Sergei Shtylyov wrote: > Hello. > > On 03/16/2016 08:10 PM, Ulrich Hecht wrote: > > >Same as on r8a7794.
Thanks, I'm pleased to see this. Its been on my todo list for a while. > > > >Signed-off-by: Ulrich Hecht <[email protected]> > >--- > > arch/arm/boot/dts/r8a7793.dtsi | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > >diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi > >index 63f811d..33413e8 100644 > >--- a/arch/arm/boot/dts/r8a7793.dtsi > >+++ b/arch/arm/boot/dts/r8a7793.dtsi > >@@ -509,6 +509,18 @@ > > reg = <0 0xe6060000 0 0x250>; > > }; > > > >+ mmcif0: mmcif@ee200000 { > >+ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; > >+ reg = <0 0xee200000 0 0x80>; > >+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; > >+ clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; > >+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, > >+ <&dmac1 0xd1>, <&dmac1 0xd2>; > >+ dma-names = "tx", "rx"; > > 4 DMA channels but only 2 channel names? Right, it looks like it should be: dma-names = "tx", "rx", "tx", "rx"; Ulrich, could you verify that and repost?
