This patch adds a new firmware version "V3" for r8a7796. This patch also revises the explanation of each version's capability using a table.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> --- drivers/usb/host/xhci-rcar.c | 17 ++++++++++++----- drivers/usb/host/xhci-rcar.h | 1 + 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 0e4535e..723f575 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -19,13 +19,20 @@ #include "xhci-rcar.h" /* -* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes -* performance degradation. So, this driver continues to use the V1 if R-Car -* Gen2. -* - The V1 firmware is impossible to use on R-Car Gen3. -*/ + * | Gen2 r8a7795 r8a7796 + * ---+---------------------------- + * V3 | note1 NG OK + * V2 | note1 OK note1 + * V1 | OK NG NG + * + * Gen2: r8a7790, r8a7791 and r8a7793 + * OK: This firmware version works correctly on such SoC(s) + * NG: This firmware version is impossible to use on such SoC(s) + * note1: This firmware version causes performance degradation. + */ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); /*** Register Offset ***/ #define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h index 2941a25..d2ffe20 100644 --- a/drivers/usb/host/xhci-rcar.h +++ b/drivers/usb/host/xhci-rcar.h @@ -13,6 +13,7 @@ #define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem" #define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem" +#define XHCI_RCAR_FIRMWARE_NAME_V3 "r8a779x_usb3_v3.dlmem" #if IS_ENABLED(CONFIG_USB_XHCI_RCAR) void xhci_rcar_start(struct usb_hcd *hcd); -- 1.9.1
